How To Use - Just 3 Easy Steps
Step 1
Install the locking ring and spin the Cure Lid on your bucket. Make sure it’s tight to ensure a proper seal.
Step 2
Touch the Cure Lid with your hand ✋ to turn it on.
Step 3
Press the auto button.
That’s it! You’re done! Now let the lid do the rest.
Cure Lids will automatically cycle the air every 6 hours (A Mode).
Want just 2 cycles? Press and hold the AUTO button for 3 seconds IN THE OFF MODE to enable the B Mode to enable 2 burps a day. Be sure to tap the auto button again to operate ON mode.
Fit’s 5 and 7 gallon buckets, along with other applications.
Ready for Long-Term Storage?
Run the smart brain for about 50 seconds to pull all of the oxygen out of your container.
Click and hold the AUTO button to switch it off before it activates the oxygen intake solenoid. Make sure your lid is screwed on tight!
Ditch your oxygen absorbers, they're now a waste of money as you don't need them in a vacuum sealed environment. Less Oxygen, Less Oxidation...bunch of science stuff, you know the deal. Fresh and potent outcome is what we're achieving here.
Check out what happens inside your bucket with Cure Lids Patented Technology
We're Sold Out Now....JK there's a few left
Fresh Air Exchange
Cure Lids will vent out gases such as C02 and exchange fresh air through a carbon filter. Just push the auto button and let it work for you.
Temp/Humidity
Accurately monitor temp and humidity levels incase you ever get worried. Just tap the smart brain in the center with your hand to light up the display for a reading. Please know that when the unit is operating it will have the most accurate reading of humidity.
Peace of Mind
Cure Lids is your personal assistant working 24hrs a day. The built-in battery lasts months before recharging.
All this stuff below is for SEO.
Our Cure Lids use advanced cannabis curing technology, ideal for large-scale growers looking to enhance the quality of their Cannabis Sativa, Cannabis Indica, and Cannabis Flower.
Enhanced Preservation: Maintain the potency and flavor of your Cannabis Extract, Cannabis Tincture, and Cannabis Oil with our patented solution.
Optimal Conditions: Automatically regulate humidity and temperature to ensure your Cannabis Strains and Cannabis Edibles retain their best qualities.
Versatile Use: Suitable for curing a variety of cannabis products, including Cannabis Gummies, Cannabis Cream, and Cannabis Candy.
Efficiency for Big Growers: Specifically designed for large operations, our Cure Lids streamline the curing process, ensuring consistent results across all your cannabis harvests.
Description:
Introducing our patented Cure Lids, the ultimate solution for curing marijuana, tailored specifically for big growers. Harnessing state-of-the-art technology, these lids are perfect for curing Cannabis Sativa, Cannabis Indica, and Cannabis Flower. Our system ensures that your cannabis products, such as Cannabis Extract, Cannabis Tincture, and Cannabis Oil, are preserved with maximum potency and flavor.
Cure Lids are not just limited to flowers; they are also effective for curing Cannabis Gummies, Cannabis Cream, and even Cannabis Candy. With automatic regulation of humidity and temperature, our lids provide the optimal conditions for curing, ensuring your Cannabis Strains and Cannabis Edibles are of the highest quality.
Designed with large-scale operations in mind, our Cure Lids offer unparalleled efficiency and consistency, making them a must-have for any big grower. Whether you are producing Cannabis Vape Pens or Cannabis Energy Drinks, our Cure Lids will ensure your products are cured to perfection, maintaining their desirable attributes.
Upgrade your curing process with our Cure Lids and experience the difference in quality and efficiency that our patented technology brings. Perfect for any big grower looking to elevate their marijuana curing process, Cure Lids are the key to better results and higher customer satisfaction.
Cannabis curing:
Cannabis curing is the process of preserving and enhancing the quality of cannabis buds after harvest. It involves drying and then storing the buds in a controlled environment for a period, typically several weeks to months. This process allows for the breakdown of chlorophyll, reduces harshness, improves flavor and aroma, and can increase potency by converting THCA to THC (Kind LED Grow Lights) (Let's All Grow Cannabis).
How to cure cannabis:
To cure cannabis, first trim the harvested buds and dry them in a cool, dark, and well-ventilated area for about a week. Once dried, place the buds in airtight containers, such as glass jars, and store them in a dark place at a stable temperature (60-70°F) and humidity (55-62%). Open the jars daily for the first week to release moisture, then reduce the frequency over the next few weeks (Kind LED Grow Lights) (Let's All Grow Cannabis) (Marijuana Grow Hub).
Best way to cure cannabis:
The best way to cure cannabis involves using glass jars with airtight seals, maintaining a consistent environment with the right temperature and humidity, and "burping" the jars regularly to prevent mold. Proper curing can take from two weeks to several months, depending on the desired quality and the specific strain (Kind LED Grow Lights) (Marijuana Grow Hub) (Premium Cultivars).
Cannabis drying and curing:
Drying and curing are critical steps in the post-harvest process. Drying typically takes 7-10 days and involves hanging the trimmed buds in a dark, well-ventilated area. Curing follows drying and involves storing the buds in airtight containers to further develop their flavor and potency. Both steps are essential to produce high-quality cannabis (Let's All Grow Cannabis) (Marijuana Grow Hub).
Curing jars for cannabis:
Curing jars, often made of glass, provide an airtight environment to store cannabis buds during the curing process. These jars help maintain the ideal humidity levels (55-62%) and protect the buds from light, which can degrade cannabinoids and terpenes. Regularly opening the jars (burping) helps release excess moisture and gases (Marijuana Grow Hub) (Cannabis Tech).
Cannabis curing process:
The cannabis curing process involves several steps: trimming, drying, and curing. After harvesting and trimming, the buds are dried for about a week. Once dried, the buds are placed in airtight containers and stored in a dark, cool place. The jars are opened daily for the first week to release moisture and gases, then less frequently over the next few weeks (Kind LED Grow Lights) (Marijuana Grow Hub) (Premium Cultivars).
Humidity for curing cannabis:
Maintaining the correct humidity levels (55-62%) during curing is crucial to prevent mold and preserve the quality of cannabis buds. Too high humidity can lead to mold, while too low can over-dry the buds, reducing their potency and flavor. Hygrometers can be used to monitor and adjust humidity levels inside curing containers (Marijuana Grow Hub) (Premium Cultivars) (Cannabis Tech).
Curing cannabis buds:
Properly curing cannabis buds involves drying them first and then placing them in airtight containers. The buds are stored in a dark, cool place with controlled humidity and temperature. This process allows the buds to develop their full flavor, aroma, and potency over time. Regular monitoring and "burping" are essential to ensure optimal curing (Kind LED Grow Lights) (Marijuana Grow Hub) (Premium Cultivars).
Temperature for curing cannabis:
The ideal temperature for curing cannabis is between 60-70°F (15-21°C). Maintaining this temperature range helps prevent mold growth and preserves the cannabinoids and terpenes in the buds. Fluctuations in temperature can negatively impact the curing process and the final quality of the cannabis (Marijuana Grow Hub) (Premium Cultivars).
Cannabis curing methods:
Various methods can be used to cure cannabis, including traditional air curing, water curing, freeze-drying, and sweat curing. Each method has its advantages and disadvantages. Traditional air curing is the most common and involves drying and storing buds in a controlled environment. Water curing removes unwanted compounds quickly but can reduce flavor. Freeze-drying is fast but expensive, and sweat curing involves high humidity and is less conventional (Cannabis Tech).
